spec no: dsab1131 rev no: v.11 date: apr/24/2010 page: 1 of 7 approved: wynec checked: allen liu drawn: z.q.ni er p: 1102000158 t-1 (3mm) bi-level led indicator part number: l-130wcp/2egw high efficiency red green features z bi-level right a ngle housing led. z pre-trimmed leads for pc board mounting. z black case enhances contrast ratio. z high reliability. z housing ul rating:94v-0. z housing material: type 66 nylon. z rohs compliant. description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. the green source color devices are made with gallium phosphide green light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsab1131 rev no: v.11 date: apr/24/2010 page: 2 of 7 approved: wynec checked: allen liu drawn: z.q.ni er p: 1102000158 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 l-130wcp/2egw high efficiency red (gaasp/gap) white diffused 7 30 green (gap) 7 25 60 symbol parameter device typ. max. units test conditions peak peak wavelength high efficiency red green 627 565 nm i f =20ma d [1] dominant wavelength high efficiency red green 625 568 nm i f =20ma ? 1/2 spectral line half-width high efficiency red green 45 30 nm i f =20ma c capacitance high efficiency red green 15 15 pf v f =0v;f=1mhz v f [2] forward voltage high efficiency red green 2 2.2 2.5 2.5 v i f =20ma i r reverse current high efficiency red green 10 10 ua v r = 5v parameter high efficiency red green units power dissipation 75 62.5 mw dc forward current 30 25 ma peak forward current [1] 160 140 ma reverse voltage v operating / storage temperature -40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds 5
spec no: dsab1131 rev no: v.11 date: apr/24/2010 page: 3 of 7 approved: wynec checked: allen liu drawn: z.q.ni er p: 1102000158 l-130wcp/2egw high efficiency red
spec no: dsab1131 rev no: v.11 date: apr/24/2010 page: 4 of 7 approved: wynec checked: allen liu drawn: z.q.ni er p: 1102000158 green
spec no: dsab1131 rev no: v.11 date: apr/24/2010 page: 5 of 7 approved: wynec checked: allen liu drawn: z.q.ni er p: 1102000158 packing & label specifications l-130wcp/2egw
spec no: dsab1131 rev no: v.11 date: apr/24/2010 page: 6 of 7 approved: wynec checked: allen liu drawn: z.q.ni er p: 1102000158
spec no: dsab1131 rev no: v.11 date: apr/24/2010 page: 7 of 7 approved: wynec checked: allen liu drawn: z.q.ni er p: 1102000158
|
